More and more families are equipped with fingerprint locks, but many families are installing them for the first time. Then we have to introduce to you, let fingerprint lock problems, leading to several important factors after-sales maintenance. Understanding these factors allows us to be on guard against problems, but also let us know that many times the new home lock is not a problem, but because the following factors affect the normal use of the smart home lock.

1, door problems

Generally, the door in the home for a long time or the new door is not installed in place, there will be a door sinking or deformation phenomenon. This will occur fingerprint lock tongue and door frame buckle box friction is too large, resulting in a greater force on the tongue, affecting the normal extension of the tongue lock. There are also some fire doors with lime in them, and when lime enters the lock body for a long time, it may cause the parts in the lock body to stuck or slowly corrode the internal parts.

Terms of settlement

The settlement and deformation of the door can be solved by adjusting the position of the side buckle plate of the door frame or by inviting the door installer to re-adjust it. Of course, experienced intelligent lock installation personnel will help customers adjust. The lime drop in the door can be prevented by foam glue blocking the position of the falling lime.

2. Battery problem

If you do not pay attention to the use of inferior batteries or fingerprint locks in the long-term vacancy of the battery is not used, there may be leakage of the battery, when the liquid flow into the circuit board will cause short-circuit impact on the use of locks. Or if the fingerprint lock starts to indicate that there is not enough power to replace the battery, the fingerprint lock can not be opened when the power is completely out.

Terms of settlement

Use brand battery and check the battery cover every half a year. If the battery is not used for a long time, remove the battery. The replacement battery is recommended to be replaced at once. Do not mix with old or new brands or use different brands. The introduction of Intel intelligent lock is currently used exclusively for fingerprint lock batteries. When the voice prompt of Intel smart lock is low, please replace the battery as soon as possible.

3. Water problem

Although the Intelligent Lock has waterproof protective coating, but as an electronic product also try to avoid contact with water or other liquids, do not immerse it in water or other liquids. If the shell is exposed to liquid or salt fog, dry it with soft and absorbent cloth.

Terms of settlement

Purchase of Intel Intelligent Lock such fingerprint lock professional brand, Intel's circuit board all waterproof protection, each lock factory after a long salt spray test. If you are installing in the open air, it is recommended to make a rain proof box for shelter.